12.6 PROGRAMMING
A right SID deflection will enter a sub-menu for programming with access to two further sub-menus, Controls and System.
12.6.1 CONTROLS
A right SID deflection will enter a sub-menu for programming user experience functions as follows:
Profiled Controls>Sleep Sets the time after which the control system will go to sleep if a SID command is not received, in
the selected profile.
Sounder Volume Sets the volume of the sounder used to indicate button presses.
Horn Volume Sets the volume of the horn when used.
Start-Up Beep Sets whether a short beep occurs when the Omni2 is turned on.
Momentary Screens Sets whether programmed Momentary Screens are displayed.
Display Speed Sets how the powerchair’s speed is displayed. Options are mph, km/h or Off.
Displays Sets the format of the digital drive display. Options are Odometer, Speed or Both.
To Next Page
Loading...
Need help?
General