ABOUT THIS MANUAL
This Technical Manual provides an introduction to the R-net Omni2. It should be read in conjunction with the R-net Technical
Manual SK77981.
Throughout the manual the following emphasis is used to draw the reader’s attention.
NOTE: A general point for best practice.
CAUTION: A point of safety which if ignored could result in damage to the Control System or the vehicle.
WARNING: A point of safety which if ignored could cause injury to the individual.
In addition to the OEM, these points are particularly aimed at the following stakeholders:
Operator (OP) – the Occupant and / or Assistant.
Healthcare Professional (HP) – the person assessing the Occupant’s needs (may also be the Installer).
Installer (IN) – the person fitting the Omni2 / SID(s) to the powerchair and / or programming to suit the Occupant
(may also be a Healthcare Professional).
It is the responsibility of the OEM to ensure that the notes, cautions and warnings, emphasized throughout this Technical
Manual, are included in the relevant documentation provided to the listed stakeholders.
Curtiss-Wright accept no liability for losses of any kind if these conditions are not met.
To Next Page
Need help?
General