12.2 DISTANCE
A right SID deflection will enter a sub-menu with the following odometer data and function options:
Total Distance This is a value held in the Power Module and relates to the total distance driven using that Power
Module.
Trip Distance This is a value held in the Omni2 and relates to the total distance driven since the last reset.
Display Distance Sets whether Total Distance or Trip Distance appears as the odometer display on the Omni2.
Clear Trip Distance A right SID deflection will clear the Trip Distance value.
12.3 BACKLIGHT
A right SID deflection will enter a sub-menu with the following backlight-related function options:
Backlight This sets the intensity of the LCD backlight. The adjustable range is 0% to 100%.
Auto Backlight The Omni2 Display Section contains an ambient light sensor to automatically adjust screen
brightness. The programmable options are On or Off. If set to On, the display adjusts the screen
brightness based on the light sensor reading. If set to Off, the screen brightness will not change
with changes in light intensity.
Backlight Timeout This adjusts the period of time the backlight will remain active once no further instructions are
received from a SID. The adjustable range is 0 to 240 seconds.
12.4 BLUETOOTH®
A right SID deflection will enter a sub-menu to configure the Bluetooth® Mode screen.
Refer to the Bluetooth® Set-up & Operation chapter for further details.
12.5 IR SET-UP
A right SID deflection will enter a sub-menu for learning and deleting IR codes.
Refer to the Infrared Control chapter for further details.
To Next Page
Loading...
Need help?
General