Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
SK81935-01
94 | R-net Omni2 Technical Manual | Chapter 5 – Infrared Control
Once a Sequence is created, Commands can be added or removed using the User Menu Tool Bar.
All of the IR Codes within a Sequence will be simultaneously actioned when the Sequence is selected.
7.5.4 DELETE
Deletes the highlighted Appliance or Command from the User Menu.
7.5.5 RENAME
Allows the highlighted Appliance or Command to be renamed.
7.5.6 MOVE UP
Moves the highlighted Appliance or Command up within the User Menu structure.
Move Up operation can also be achieved through standard windows drag and drop functions.
7.5.7 MOVE DOWN
Moves the highlighted Appliance or Command down within the User Menu structure.
Move Down operation can also be achieved through standard windows drag and drop functions.
7.5.8 CLEAR IR CODE
To remove an IR Code from a Command in the User Menu, highlight that Command and click Clear IR Code. The IR Code will
be cleared and the icon will change to be non-colored.
7.5.9 EDIT MY LIBRARY
This function is only available when the My Library tab is selected, refer to the Libraries section for further details.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English