Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 6 – Bluetooth Set-Up & Operation | 115
SK81935-01
Select Add New Switch.
A screen such as below should appear.
Activate the Omni2 command you wish to assign to the iDevice; for example, a long reverse nudge.
When the command has been received, a screen such as below will appear.
Enter a convenient name – for example, long back – and then Save.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English