Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 6 – Bluetooth Set-Up & Operation | 117
SK81935-01
- Time-related operations of two external profile jack switches.
The timings associated with the external switch operations are programmable. Refer to the Bluetooth® Programming Chapter
for further information.
- The Speed Down and Speed Up buttons.
The procedure to enable VoiceOver on the iDevice and assign commands is as follows.
From the iDevice Settings menu, select General > Accessibility and set VoiceOver to On.
The remainder of VoiceOver set-up is via the R-net PC Programmer.
Firstly, set the parameter VoiceOver and then use the relevant parameters to assign Omni2 to iDevice commands. Refer to the
Bluetooth® Programming chapter for further details.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English