Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
SK81935-01
124 | R-net Omni2 Technical Manual | Chapter 7 – Bluetooth Programming
Cursor Right – The screen cursor will move to the right by one application.
Select – The highlighted application or item will be selected (equivalent to a double tap).
App Switcher – This presents the App Switcher screen.
Toggle Virtual Keyboard – This will show or hide the virtual keyboard.
Back – In Safari, goes back to previous page.
Home – This will select the Home screen.
Quick Nav – Allows navigation using arrow keys (left and right cursor).
Volume Up – This will increase the volume.
Volume Down – This will decrease the volume.
Any action that is not programmed will remain as the default setting.
NOTE (HP, IN)
When keyboard is visible, Back command toggles between split keyboard and normal keyboard.
1.2.1.3 FORWARD, REVERSE, LEFT, RIGHT, EXTERNAL SWITCH 1 & EXTERNAL SWITCH 2 LONG
These represent the functions associated with Long commands in VoiceOver Mode.
The programmable options are as follows:
No Action – No action will be initiated.
Cursor Left – The screen cursor will move to the left by one application.
Cursor Right – The screen cursor will move to the right by one application.
Select – The highlighted application or item will be selected (equivalent to a double tap).
App Switcher – This presents the App Switcher screen.
Toggle Virtual Keyboard – This will show or hide the virtual keyboard.
Back – In Safari, goes back to previous page.
Home – This will select the Home screen.
Quick Nav – Allows navigation using arrow keys (left and right cursor).
Volume Up – This will increase the volume.
Volume Down – This will decrease the volume.
Any action that is not programmed will remain as the default setting.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English