1.2.1.9 DEVICE NAME
This is a text string that will appear on the Omni2 LCD screen to indicate the active Bluetooth® device.
1.2.1.10 MODE
The parameter Mode sets the mode of operation for the iDevice module.
The programmable options are as follows:
VoiceOver – The iDevice will use VoiceOver Mode on the connected iDevice.
Switch Control – The iDevice module will use Switch Control Mode on the connected iDevice.
1.2.1.11 SCREEN GRAPHIC
Sets the screen graphic for the iDevice module. The programmable options are Computer, Phone or Tablet.
Computer Phone Tablet
To Next Page
Loading...