Curtiss-Wright R-NET OMNI2 - Page 55

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 3 – Programming | 55
SK81935-01
Position 5 Blank
Position 6 Blank
Position 7 Blank
Position 8 Blank
Position 9 Blank
Position 10 Blank
l
Position 16 Blank
Position Type
Position 1 Type Entry
Position 2 Type Entry
Position 3 Type Entry
Position 4 Type Entry
Position 5 Type Entry
l
Position 16 Type Entry
Beeps
Profile Change* Short
Mode Change* Short
User Menu Entry* Short
User Menu Scroll* Short
Profile Id#* Off
Axis Id#* Off
Position 1#* 0
l
Position 16#* 0
Settings
Time
Set Time Current Time
Display Time 24hr
Distance
Total Distance Information
Trip Distance Information
Display Distance Trip
Clear Trip Distance Clear
Backlight
Backlight 100%
Auto Backlight Off
Backlight Timeout 5s
Bluetooth®
R-net Mouse 1 Off
R-net Mouse 2 Off
R-net iDevice 1 Off
R-net iDevice 2 Off
Regulatory Information
IR Setup Refer to Infrared Chapter
Training Mode
Fwd Inhibit No
Rev Inhibit No
Left Inhibit No
Right Inhibit No