For the top 3 lines, there would only be 1 beep, as those lines all relate to Position 1. For the fourth line, there would be 2
beeps, as that line effectively relates to Position 2. Therefore, in this instance, a more sensible programming arrangement
may be.
Position 1 = Drive
Position 1 Type = List
Position 1 = 0 beep
Profile Identifier # = On
Position 2 = 4 beeps
This would result in 1 to 3 beeps for the first 3 lines and 4 beeps for the fourth line.
To Next Page
Loading...