User's Manual
142
Installation Method Display Mode Description
1+3 Original image + 3 section images.
1+4 Original image + 4 section images.
1P+6
Corrected 360° panoramic image + 6 section
images.
1+8 Original image + 8 section images.
Wall mount
1P Corrected 180° image from left to right.
1P+3 Corrected 180° image + 3 section images.
1P+4 Corrected 180° image + 4 section images.
1P+8 Corrected 180° image + 8 section images.
Step 6 Click
OK
.
7.1.1.3.6 Smart Tracking
Track targets manually or automatically. This function is only available on the multi-sensor
panoramic camera + PTZ camera.
Make sure that the linked tracking function has been enabled.
Procedure
Step 1 Log in to the PC client.
Step 2 Under the
Live
tab, open a view.
Step 3 Right-click the live video, and then select
Smart Tracking
>
ON
.
Step 4 Select the tracking method.
●
Manual positioning: Click a spot or select a zone on the bullet camera video, and then
the PTZ camera will automatically rotates there and zoom in.
●
Manual tracking: Click or select a target on the bullet camera video, and then the PTZ
camera automatically rotates and tracks it.
●
Automatic tracking: The tracking action is automatically triggered by tripwire or
intrusion alarms according to the pre-defined rules.
7.1.1.3.7 Thermal
Log in to the PC client. Under the
Live
tab, a thermal camera has 2 channels by default: visible light
channel and thermal channel.
Select the thermal channel, point to any position on the live video, and then you can view the real-
time temperature of the position.
To Next Page
Loading...
