User's Manual
184
Mouse Operations
●
Point to the remote device name, you can view remote device IP
address and port number.
●
On the device list, click one remote device and then press Ctrl, click
other remote device, you can select several remote devices at the
same time.
●
On the device list, select one remote device and then press Shift, click
other remote device, select current two remote devices and all
remote devices listed between them.
●
Right-click a remote device to connect to disconnect it.
●
Double-click remote device or drag the remote device to the view
window on the right panel, you can enter edit the view interface. See
"7.1.1.2.2 Editing View" for detailed information.
7.1.3 PTZ
Set PTZ functions and perform PTZ control so the PTZ camera can rotate accordingly to monitor all
directions.
The PTZ functions might vary depending on the device models.
Log in to PCAPP. On the
LIVE page, PTZ is displayed at the lower-left corner.
The following figure for reference only. The grey button means current function is null.
To Next Page
Loading...
