User's Manual
58
Table 6-1 AI Events by Device or Camera
Face Detection Yes Yes
Face Recognition Yes Yes
People Counting Yes No
Video Metadata Yes Yes
IVS Yes Yes
Crowd Distribution Yes No
Call Alarm Yes No
Smoking Alarm Yes No
Vehicle Recognition Yes No
Plate Comparison No Yes
6.2 Face Detection
System triggers alarms when human faces are detected within the detection zone.
6.2.1 Enabling AI Plan
To use AI by camera, you need to enable AI plan first.
●
AI plan is available on select models.
●
The Device automatically shows the AI functions available on the connected cameras.
Step 1 Click , or click on the configuration page, and then select
EVENT.
The EVENT page is displayed.
Step 2 Select a camera in the device tree on the left.
Step 3 Select AI Application > AI Plan > AI Plan.
●
The page might vary depending on the function capabilities of cameras.
●
When the camera is a PTZ camera, configure presets on the camera system first, and
then you can set AI features for each preset of the PTZ camera.
Step 4 Click to enable AI detection plan. The icon becomes .
When there is a conflict between the to-be-enabled AI plan and an enabled plan, disable
the enabled plan first.
Step 5 Click
Save.
6.2.2 Configuring Face Detection
Configure alarm rule of face detection.
Step 1 Click or click on the configuration page, and then select
EVENT.
To Next Page
Loading...
Need help?
General
