User's Manual
189
7.1.3.2.2 Setting a Cruise
A cruise is a sequential set of presets. After you call a cruise, the PTZ camera automatically rotates to
the presets one by one at the pre-defined interval.
Procedure
Step 1 Log in to PCAPP.
Step 2 Select a PTZ camera from the views.
Step 3 On the PTZ panel, click .
Step 4 Click , enter the name of the new cruise, and then click to save.
Step 5 Click Add, select a cruise, and then click .
Repeat this step to add multiple presets into the cruise.
Figure 7-25 Add a cruise
Step 6 To call the cruise, hover over the cruise name, and then click . To stop the cruise, click
.
Related Operations
●
Edit a cruise:
◇
To edit cruise name, double-click the name. To quit, click .
◇
To modify the cruise, select the cruise, and then click , modify the settings, and then click
.
●
To delete a cruise, select it and then click .
●
To refresh cruises list, click .
7.1.3.2.3 Setting a Pattern
A pattern is a recorded series of PTZ operations such as pan, tilt, zoom and focusing. You call a
pattern to let the camera repeat the corresponding operations.
Step 1 Log in to PCAPP.
To Next Page
Loading...
Need help?
General
