User's Manual
111
●
Point to the report, and then the report shows the details at that time point.
●
Drag the gray scroll bar under the ordinate to view the statistics for different time periods.
●
Click to view the line chart.
●
Click to view the bar chart.
●
Click to export the report.
6.5 Video Metadata
The system analyzes real-time video stream to detect the existence of 4 target types: human, human
face, motor vehicle, non-motor vehicle. Once a target is detected, the system can record video, take
snapshots and trigger alarms.
This section introduces how to configure the video metadata feature from enabling it and selecting
target types to setting the live view of video metadata.
6.5.1 Enabling AI Plan
Enable AI plan when AI by camera is used. See "6.2.1 Enabling AI Plan" to enable video metadata
function.
6.5.2 Configuring Video Metadata
After enabling video metadata, the Device links the current remote device to record video when
alarm is triggered.
●
The Device supports metadata by camera (AI by Camera on the page) or by the Device (AI by
Device on the page). This section uses metadata by the Device for example to introduce the
configuration procedure.
●
Video metadata cannot be enabled at the same time with face detection and IVS, because it
conflicts with the two functions.
Step 1 Click or , and then select EVENT.
Step 2 Select a device from the device tree at the left side.
Step 3 Select AI Application > Video Metadata > AI by Device.
To Next Page
Loading...
Need help?
General
