User's Manual
116
Figure 6-78 Human detection
●
Point to the snapshot, and then click to add the face image to face database. For details, see
"6.3.3.4.3 Adding Face Image".
This function is available when face image is captured.
●
Point to the snapshot, and then click or double-click the picture to play back the video
record (10 s before and after the snapshot).
●
Point to the snapshot, and then click to export the video record to specified saving path.
●
Point to the snapshot, and then click to search for similar targets in the snapshot records.
Make sure that USB storage device is connected during local operation.
6.5.3.3.2 Motor Vehicle
On the LIVE page, click , the VEHICLE TOTAL page is displayed.
Click , and then select
Vehicle Recognition, the information of detected vehicles is displayed.
Figure 6-79 Motor vehicle detection
●
Point to the panel, and then click to add the license plate image to plate database. For
details, see "6.8.3.2.3 Adding from Detection Results".
●
Point to the panel, and then click , or double-click detected picture to play back the video
record (10 s before and after the snapshot).
●
Point to the panel, and then click to export the video record to specified saving path.
Make sure that USB storage device is connected during local operation.
6.5.3.3.3 Non-motor Vehicle
On the LIVE page, click .
Click , and then select
Snap With Face and Snap Without Face. The information of detected
non-motor vehicles is displayed.