User's Manual
227
Figure 8-57 Set a recording schedule
Step 5 Select
General
,
Record Events
, or both as the recording type.
●
General
: Click the box next to
General
to select a schedule or click
Add Schedule
to
add a new schedule. The Device records in the configured schedule. For details, see
"8.7.4 Schedule".
●
Record Events
: Set the pre-record time. The Device records before an event occurs.
Step 6 Configure other parameters.
Table 8-26 Time plan parameters
Parameter Description
ANR
Click to enable ANR (Automatic Network Replenishment).
When the network connection between the Device and IPC fails, the
IPC continues to record videos and store videos on the SD card on
the camera. When network recovers, the Device downloads those
videos from IPC.
Set the maximum recording upload period. If the offline period is
longer than the defined period, IPC will only upload the recording
file during the specified period.
Make sure that the IPC has an SD card and is recording.
Record Stream Select stream types and recording modes.
Instant Record Duration
The duration of instant recording. After starting instant recording
under the
Live
tab, if you do not stop recording, the system will
automatically stops after the defined duration.
To Next Page
Loading...
Need help?
General
