User's Manual
290
Figure 8-86 Add a schedule
6. Click Save.
Step 3 Set other parameters and then click
OK.
●
Record Events: Record event videos.
●
Pre-record: The recording duration prior to the event.
●
ANR: Automatic Network Replenishment. When ANR is enabled (by clicking ) , the
Device will download videos recorded by IPC and stored on camera SD card during
network disconnection. Enter the time length of the video to be downloaded from IPC.
The Device will download only the defined length of video even if the disconnection is
longer.
Make sure that the IPC has an SD card and is recording.
●
Record Stream: Select stream types and recording modes.
●
Instant Record Duration: The duration of instant recording. After starting instant
recording on the
LIVE page, if you do not stop recording, it will automatically stops
after the defined duration.
●
Manual Snap: The number of images for each manual capture action. Enter a value to
specify the number of seconds between each image.
●
Event Snap: The number of images captured for each event.
●
Copy to: Copy the current settings to other channels.
To Next Page
Loading...
Need help?
General
