User's Manual
54
Figure 5-14 Remote device setting
Table 5-8 Parameters of adding remote device
Parameters Description
Channel No.
Select a channel number for the remote device on IVSS.
If you select
Auto Allocation
, IVSS will provide a channel number
automatically.
Manufacturer
Select the connection protocol of the remote device.
Private
is selected by
default.
IP Address Enter the IP address of the remote device.
Device No.
Enter the unique device No. allocated by the server for the remote device.
When
Manufacturer
is
Register
, you need to configure this parameter.
RTSP Mode
Select
Self-adaptive
or
Custom
.
When
Manufacturer
is
Onvif
or
Onvifs
, you need to configure this
parameter.
RTSP Port
When you select
Custom
for
RTSP Mode
, enter the RTSP port number. The
default port number is 554. The value ranges from 1 through 65535.
To Next Page
Loading...
Need help?
General
