Dahua Technology DHI-IVSS7124 User Manual

User's Manual
92
Parameter Description
Exit No. Number of people that exited.
Stay No.
The number of stay is the result of entry number minus exit
number. An alarm is triggered when the stay number reaches the
threshold.
Step 7 Click
Schedule
to select a schedule from the drop-down list.
The system triggers corresponding alarm actions only during the alarm deployment
period.
You can select an existing schedule from the
Schedule
drop-down list. You can also add a
new schedule.
Step 8 Click
Select
next to
Event Linkage
to set alarm actions.
Step 9 Click
Save
.
6.4.3 Configuring In Area No.
The system counts the number of people in and out of the detection area. When the number of
entry or exit is larger or smaller than the threshold or when the dwell time of any person in the area
is greater than the threshold, an alarm is triggered.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Event
.
You can also click
Event
from the configuration list on the home page.
Step 3 Select a remote device on the device tree, and then select
Smart Plan
>
People
Counting
>
Rule Config
.
Step 4 Click
Add Rule
, select
Area People Counting
, and then click to enable the function.
Step 5 Draw a detection zone.
●
Click to draw the detection zone.
●
Click to set the whole image as the detection area.
Step 6 Set parameters.

Dahua Technology DHI-IVSS7124 Specifications

General

Brand	Dahua Technology
Model	DHI-IVSS7124
Category	DVR
Language	English