Dahua Technology DHI-IVSS7124 User Manual

User's Manual
129
Procedure
Step 1 Log in to the PC client.
Step 2 On the home page, click
Search
.
Step 3 Select one or more devices.
Step 4 You can search for the videos or images of call detection.
●
Videos
1. Under the
Record
tab, select
Thermal
as video type.
2. Select
Call Detection
as detection type.
3. Select a stream type.
4. Set the search period.
5. Click
Search
.
●
Images
1. Under the
Picture
tab, select
Thermal
as snapshot type.
2. Select
Call Detection
as detection type.
3. Set the search period.
4. Click
Search
.
6.11 Smoking Alarm
An alarm is triggered when the system detects a person smoking.
Smoking alarm is only available with AI by Camera.
6.11.1 Enabling the Smart Plan
To use AI by Camera, you need to enable the corresponding smart plan first. For details, see "6.2.1
Enabling the Smart Plan".
6.11.2 Configuring Smoking Alarm
Configure smoking alarm rules. Smoking detection in only available with thermal cameras.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Event
.
You can also click
Event
from the configuration list on the home page.
Step 3 On the device tree, select the thermal channel of a thermal camera.
Step 4 Select
Smart Plan
>
Smoking Detection
.
Step 5 Click to enable the function.
Step 6 Set the sensitivity and minimum duration.
●
Sensitivity: The higher the sensitivity, the easier the smoking action is detected but
meanwhile the higher probability of false alarms.
●
Minimum duration: If the smoking action still lasts longer than the minimum duration,

Dahua Technology DHI-IVSS7124 Specifications

General

Brand	Dahua Technology
Model	DHI-IVSS7124
Category	DVR
Language	English