User's Manual
96
You can also click
Event
from the configuration list on the home page.
Step 3 Select a remote device on the device tree, and then select
Smart Plan
>
Video Metadata
.
Step 4 Configure video metadata.
●
AI by Camera.
1. Click
AI by Camera
, and then click to enable the function.
2. Click next to
On
to enable people detection, motor vehicle detection and non-
motor vehicle detection.
●
AI by Recorder.
1. Click
AI by Recorder
, and then click to enable the function.
2. Click next to
Extract Eigenvector
to enable eigenvector extraction, and then
the Device can extract features of human, vehicles and non-motor vehicles and
display them on the live view. The search by image function for video metadata is
available only when feature vector extraction is enabled.
3. Click next to
On
to enable people detection, motor vehicle detection and non-
motor vehicle detection.
When AI by Recorder is used, you can click next to
Face
turn on face detection
for people detection and non-motor vehicle detection.
4. Select an alarm type.
◇
All
: An alarm is triggered when a target is detected.
◇
Match Attributes Alarm
: An alarm is triggered when the detected target
matches the defined attributes.
◇
Mismatch Attributes Alarm
: An alarm is triggered when the detected target
does not match the defined attributes.
5. Click to draw a detection zone on the video.
◇
Click the dots on the frame of the detection zone, and drag to adjust its range.
◇
Click to draw an exclusion area. The Device does not detect targets within
the excluded area.
◇
Click or to set the minimum size or maximum size of the detection zone.
The system triggers an alarm only when the size of the detected target is
between the maximum size and the minimum size.
Step 5 Click
Schedule
to select a schedule from the drop-down list.
The system triggers corresponding alarm actions only during the alarm deployment
period.
You can select an existing schedule from the
Schedule
drop-down list. You can also add a
new schedule.
Step 6 Click
Select
next to
Event Linkage
to set alarm actions.
Step 7 Click
Save
.
6.5.3 Live View of Video Metadata
View the detection results of face, people, motor vehicle and non-motor vehicle under the
Live
tab.
To Next Page
Loading...
Need help?
General
