User's Manual
268
Make sure that you have enabled
Run Log
in
Security
>
System Service
. Otherwise there is no log
data.
Log in to the PC client. On the home page, select
Maintain
>
Intelligent Diagnosis
>
Run Log
.
The logs might be overwritten when the storage space runs out. Back up the logs in time.
●
Export logs one by one: Click to export a log.
●
Export logs in batches: Select multiple logs, and then click
Export
.
9.8 Maintenance Manager
To clear the malfunction or error during the system operation and enhance operation performance,
you can restart the Device, restore factory default setup, update the system and more.
9.8.1 Update
9.8.1.1 Updating the Device
You can import the update file to update the system version of the Device. The extension name of
the update file is .bin.
Prerequisites
You need to obtain the correct update file and save it in the corresponding path.
●
When operating on the local interface, save the update file in the USB storage device and then
connect the USB storage device to the IVSS.
●
When operating on the web interface or PC client, save the update file on your computer.
●
During update, do not disconnect the Device from power and network, or restart or shut down
the Device.
●
Make sure that the update file is correct. Improper update file might result in device error.
Procedure
Step 1 Log in to the PC client.
Step 2 On the home page, select
Maintain
>
Manager
>
Update
>
Host Update
.
Step 3 Click
Import Update File
to select an update file.
Step 4 Click
OK
.
The system starts updating. The Device automatically restarts after successfully updated.
9.8.1.2 Updating AI Module
You can import the update file to update the AI module. The extension name of the update file