User's Manual
60
AI Events by Recorder or Camera
Table 6-1 AI Events by Recorder or Camera
AI Event AI by Camera AI by Recorder
Face Detection Yes Yes
Face Comparison Yes Yes
People Counting Yes No
Video Metadata Yes Yes
IVS Yes Yes
Crowd Distribution Yes No
Call Alarm Yes No
Smoking Alarm Yes No
ANPR Yes No
Plate Comparison No Yes
6.2 Face Detection
An alarm is triggered when human faces are detected within the detection zone.
6.2.1 Enabling the Smart Plan
To use AI by Camera, you need to enable the smart plan first.
●
The Device automatically shows the smart functions available on the connected remote devices.
●
Smart plan is available on select remote devices.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Event
.
You can also click
Event
from the configuration list on the home page.
Step 3 Select a remote device in the device tree on the left.
Step 4 Select
Smart Plan
>
Smart Plan
.
●
The smart functions available might differ depending on the remote devices.
●
When the remote device is a PTZ camera, configure presets on the camera system first,
and then you can set AI functions for each preset of the PTZ camera.
Step 5 Click to enable the smart plan.
Step 6 Click
Apply
.
To Next Page
Loading...
Need help?
General
