User's Manual
127
3. Set the crow density.
Step 8 Click
Schedule
to select a schedule from the drop-down list.
The system triggers corresponding alarm actions only during the alarm deployment
period.
You can select an existing schedule from the
Schedule
drop-down list. You can also add a
new schedule.
Step 9 Click
Select
next to
Event Linkage
to set alarm actions.
Step 10 Click
Save
.
6.9.3 Live View of Crowd Distribution
Log in to the PC client, and then under the
Live
tab, open a view window. The video image of the
view is displayed.
The video shows people numbers and distribution status in the detection zones in real time. The
frame around the detection zone flashes red when there is an alarm in the zone.
Figure 6-40 Live view of crowd distribution
●
Right-click the live video, and then select
Crowd Distribution Map
>
PIP
. A blue section is
displayed, and you can view the crowd distribution status inside the current view.
●
Right-click the live video, and then select
Crowd Distribution Map
>
Global
to view overall
crowd density and people heads.
6.10 Call Alarm
An alarm is triggered when the system detects a person calling. To configure call alarm, set call