User's Manual
92
1. On LIVE page, click , and then select FILE > Face Management > Face Database > Local.
2. Double-click a face database.
3. Click
Batch Import.
4. Import face image.
●
Upload a file: Click , select multiple face images, and then click
Open.
You can select multiple face images by holding Shift and then clicking the first and the last
face images, or holding Ctrl and then click the images one by one.
●
Upload a folder: Click , select the folder with face images, and then click
Upload.
Figure 6-45 Batch import
5. Click OK.
6. Click
Save and continue to add or OK.
●
Click
Save and Continue to add to save current face image information and add another
human face image.
●
Click
OK to save current face image information and complete registration.
After adding the image, at the lower-left corner of the human face image, there is an icon . It
means device that face abstracting in process.
Bin Import
To import face images from another device into the current device, you can import a bin file of face
images exported from that device.
1. On
LIVE page, click , and then select FILE > Face Management > Face Database > Local.
2. Double-click a face database.
3. Click
Bin Import.
4. Enter the file Path and Password, and then click OK.
●
The
Password is the one created when the file was being exported.
To Next Page
Loading...
Need help?
General
