Daikin D-BACS - Page 230

1.10 Functions 213
Interface for Use in BACnet
®
1.10.2 Major Functions of Air-conditioner Devices (Incl. Adaptors) to be Connected
When the air-conditioners are hooked up with the Interface for use in BACnet
®
, the following functions can be performed
and monitored from the master station or the central monitor panel.
Note :
1. *When set at the unit, the status is not notified to upper devices and cannot be monitored from them.
2.
U: Available for certain models only.
Function VRV System Hi Sky Multi
SkyAir
(adapter for
SkyAir
connection)
Duct-
connected type
air conditioner
(central control
adapter)
HRV
Room air
conditioners
(general-
purpose
adapter)
Remarks
Start / stop operation
and monitoring
{{{{{{
Air conditioner
malfunction
notification
{{{{{{
Room temperature
monitoring
{{{{
××
Temperature setting
and monitoring
{{{{
××
Air-conditioning mode
setting and monitoring
{{{{
× × Air-conditioning mode
switching is effective
only for indoor units for
which cool / heat
selection is permitted.
Remote-control mode
setting and monitoring
{{{{{
×
Filter sign monitoring
and reset
{{{
×
{
×
Thermostat status
monitoring
{{{
×××
Compressor
operation status
monitoring
{{{
×××
Indoor fan operation
status monitoring
{{{
×
{
×
Heater operation
status monitoring
{{{
×××
Humidifier operation
status monitoring
{{{
×××
Air direction setting
and monitoring
{{{
×××
Air flow rate setting
and monitoring
{{{
×
U
Monitoring
only
×
Forced thermostat
disable setting and
monitoring
{
*
{{
×××
Energy saving
(set temperature shift)
{{
××××
Accumulated power
{{U
×
U
×