Daikin D-BACS - Intelligent Touch Controller (DCS601 C51) with the Software for P.P.D. Application (DCS002 C51) Including PCMCIA

269
Power Proportional Distribution (P.P.D.)
2. intelligent Touch Controller (DCS601C51) with the Software for P.P.D. Application (DCS002C51) Including PCMCIA
DCS601C51 (Back side)
kWh-meters
[Field Supply]
Remark Model/SpecArrangement
Equipment
•1 pulse to 1kW·h or 10kW·h pulse width must be
within 40-400m/sec.
•Output relay must be or electronic type only.
•No voltage output.
Pulse
transmitter
Field SupplykW·h meter
Activation number card included
PCMCIA card included
DCS002C51DAIKIN
Option for Intelligent
Touch Controller (P.P.D)
Up to 64 groups can be connectedDCS601C51DAIKIN
Intelligent Touch
Controller
DIII-NET
Power
Supply
3φ 4W 380-415V
50Hz
Refer to field wiring on previous
page about power supply wiring.
Note)
The power consumption
of the outdoor unit can
be proportionally
calculated for each
indoor unit using the
intelligent touch
controller and the
Power Proportional
Distribution software.
The calculated results
are recorded in the
intelligent touch
controller for 13 months.
The calculated results
can be taken out with
the PCMCIA card so
that the data can be
handled using any
spreadsheet software
including Excel on the
PC.
Outdoor Unit
L3 N
L2L1
A B C F1
F2 F1 F2 Q1Q2
CSV output of P.P.D. PCMCIA
[DAIKIN option attached P.P.D.]
DAIKIN
The optional Power Proportional
Distribution (P P D ) results can be saved
to a CSV file.
Switch
Power Supply
1φ 220-240V 50Hz
Power Supply
DIII
Contact Signal
R/C
F1 F2 P1 P2
Indoor Unit
F1 F2 P1
P2
Indoor Unit
Outdoor Unit
L3 NL2L1
A B C F1 F2 F1 F2 Q1
Q2
Outdoor Unit
L3 NL2L1
A B C F1 F2 F1 F2 Q1Q2
Outdoor Unit
L3 NL2L1
A B C F1 F2 F1 F2 Q1Q2
Outdoor Unit
L3 NL2L1
A B C F1 F2 F1 F2 Q1Q2
R/C
F1 F2 P1 P2
Indoor Unit
R/C
R/C
up to 64 units of
A/Cs and equipment
Remote Control