6.3 Group Address Number 41
Fundamental of DIII-NET
6.3 Group Address Number
• Set a centralized address to a device to be connected to DIII-NET.
• The range of addresses to be set is 64 types as shown below.
• You cannot set a same address on a same DIII-NET.
• You do not need to set a centralized address to a child unit in a remote control group.
- In the case of proportional power, you need to set a centralized address to a child unit in a remote control group as
well.
1-00~1-15 ······16 types
Total 64 types
2-00~2-15 ······16 types
3-00~3-15 ······16 types
4-00~4-15 ······16 types
Normal centralized address setting
1-00 1-01
1-031-02
To Next Page
Loading...
