Daikin D-BACS - Page 67

50 8.1 Check for Centralized Control Devices in Simultaneous Use
Fundamental of DIII-NET
intelligent Manager
BACnet
®
Interface
DMS interface
intelligent Touch
Controller
Central controller
ON/OFF controller
Unit name
DIII-NET PLUS
adaptor
Parallel interface
intelligent Manager
BACnet
®
Interface
DMS interface
Central controller
ON/OFF controller
Connector setup for parent centralized control
Master/slave
Unit name
DIII-NET PLUS
adaptor
Parallel interface
intelligent Touch
Controller
Qty.
1
1
4
1
To be mounted
Remote control inhibition
setting disabled for master
1. To be removed
2. To be removed
3. To be removed
4. To be removed
To be removed
1. Master
2. Slave
3. Master
4. Slave
Connector setup for DIII-NET parent centralized control
Master/slave setting
To be removed
*Example of entry
Master/slav : Memo field to be used in setting a
connector For DIII-NET parent centralized control. Make
an entry, Referring to an example of entry.
Quantity : Enter the quantity of units connected.
Connector setup for DIII-NET centralized control
Specify whether the unit is a parent or a child
Master/Slave : Specify whether the unit is a master or
a slave.