Danfoss VACON NXP IP00 User Manual

1.
2.
3.
4.
5.
8.7.9.5 Software (S6.8.3)
The Software information page includes information on the AC drive software.
Page
Content
6.8.3.1
Software package
6.8.3.2
System software version
6.8.3.3
Firmware interface
6.8.3.4
System load
8.7.9.6 Applications (S6.8.4)
The Applications submenu (S6.8.4) contains information on all applications on the AC drive.
Page
Content
6.8.4.#
Name of application
6.8.4.#.1
Application ID
6.8.4.#.2
Version
6.8.4.#.3
Firmware interface
8.7.9.7 Examining the Application Page
Use these instructions to examine the Applications pages.
Procedure
In the System info submenu, find the Applications page with the Browser buttons.
To go to the Applications page, push the Menu button Right.
To select the application, use the Browser buttons. There are as many pages as there are applications on the AC drive.
To go to the Information pages, use the Menu button Right.
To see the different pages, use the Browser buttons.
8.7.9.8 Hardware (S6.8.5)
The Hardware information page includes information on the AC drive hardware.
Page
Content
6.8.5.1
Power unit type code
6.8.5.2
Nominal voltage of the unit
6.8.5.3
Brake chopper
6.8.5.4
Brake resistor
6.8.5.5
Serial number
AQ351737303996en-000201 / DPD00888106 | Danfoss A/S © 2023.09
Using the Control Panel
VACON® NXP IP00 Drive Modules
Operating Guide

Danfoss VACON NXP IP00 Specifications

General

Brand	Danfoss
Model	VACON NXP IP00
Category	Control Unit
Language	English