Danfoss VACON NXP IP00 User Manual

1.

2.

3.

4.

8.3 Using the Parameter Menu (M2)
8.3.1 Finding the Parameter
Use these instructions to find the parameter to edit.
Procedure
To find the Parameter menu, scroll down in the main menu until the location indication M2 shows on the first line of the
display.
READY
G1
Keypad
G8
e30bg023.10
Parameters
Push the Menu button Right to move into the Parameter Group Menu (G#).
READY
Keypad
G1 G8
e30bg024.10
Input signals
To find the parameter group, use the Browser buttons Up and Down.
READY
Keypad
P1
P18
e30bg025.10
Input signals
Use the Browser buttons Up and Down to find the parameter (P#) to edit. To move directly from the last parameter of a
parameter group to the first parameter of that group, push the Browser button Up.
READY
Keypad
e30bg026.10
Min Frequency
13.95 Hz
AQ351737303996en-000201 / DPD0088886 | Danfoss A/S © 2023.09
Using the Control Panel
VACON® NXP IP00 Drive Modules
Operating Guide

Danfoss VACON NXP IP00 Specifications

General

Brand	Danfoss
Model	VACON NXP IP00
Category	Control Unit
Language	English