1.
2.
3.
4.
1.
2.
Procedure
Place the lifting hooks on the eyebolts.
Move the unit to the place needed.
After lifting the unit, check for signs of damage on the unit.
Recycle the packaging material according to local regulations.
4.6 Using the Product Modified Label
In the accessories bag, there is also a "product modified" label. The function of the label is to tell the service personnel about the
changes that are made in the AC drive.
Procedure
Attach the label on the side of the AC drive, in a place where it is easy to find.
If changes are made to the AC drive, write the change and date on the label.
AQ351737303996en-000201 / DPD00888 | 27Danfoss A/S © 2023.09
Receiving the Delivery
VACON® NXP IP00 Drive Modules
Operating Guide
To Next Page
Loading...
Need help?
General
