Table 55: Fuse Sizes (Bussmann) for 525–690 V AC, FR10–FR12, 12-pulse
Flush end contacts (met-
ric)
1
SHT fuses can be assembled into same size DIN fuse base
2
In FR12 (12-pulse drive) or in FR12 (6- or 12-pulse) with internal brake, the DC-links between units are connected together. If connected together,
there must be DC-link fuses in DC-minus and DC-plus poles between the units. (In 6-pulse drive without internal brake, DC-links between units are
separate and there is no need for fuses.)
Table 56: Fuse Sizes (Bussmann) for 525–690 V AC, FR13–FR14, 12-pulse
Fuses with flush end contact
(metric)
Fuses with flush end contact
(US)
Fuse part nr. (aR)
(AC/DC)
Table 57: Fuse Sizes (Ferraz Shawmut) for 525–690 V AC, FR10–FR12, 12-pulse
Threaded end
contacts (metric)
AQ351737303996en-000201 / DPD00888140 | Danfoss A/S © 2023.09
Specifications
VACON® NXP IP00 Drive Modules
Operating Guide