Danfoss VACON NXP IP00 - Editing Numerical Values Digit by Digit

1.

2.

3.
4.

5.
Procedure
Find the parameter with the Browser and Menu buttons.
READY
Keypad
e30bg026.10
Min Frequency
13.95 Hz
To go to the Edit mode, push the Menu button Right. The parameter value starts to blink.
READY
Keypad
e30bg028.10
Min Frequency
13.95 Hz
Push the Menu button Right. The value can now be edited digit by digit.
To accept the change, push the [enter] button.
To ignore the change, push Menu button Left many times, until the view goes back to the parameter list.
If the [enter] button is pushed, the value stops to blink and the new value shows in the value field.
READY
Keypad
e30bg029.10
Min Frequency
14.45 Hz
For locking the parameter values, use the Parameter Lock function in menu M6, see 8.7.6.6 Locking a Parameter.
AQ351737303996en-000201 / DPD0088888 | Danfoss A/S © 2023.09
Using the Control Panel
VACON® NXP IP00 Drive Modules
Operating Guide