RS20i Installation and Operating Guide Page E-10
Appendix E. Remote Command API Document #: 9301H52900 Ver. 1.02
Notes:
The mode will not change when the selected mode is not valid for the current speaker
configuration.
Sub Configurations
DTS Neo:X See the command NEOXMODE for details on configuration item
available only with DTS Neo:X.
Dolby PLIIx See the command DPL2MODE for details on Pro Logic IIx
configuration items.
Dolby PLIIz See the command DPL2HEGAIN for details on and additional Pro
Logic IIz configuration item.
Example
Enable DTS Neo:X.
Send: @DECODERPOST 3<cr>
Receive: DECODERPOST 3<cr>
12. Neo:X Mode
Select Neo:X mode to Cinema, Music or Game. The Neo:X mode selection is in affect
only when the Post Processing Mode (DECODERPOST) is set for Neo:X.
Command: @NEOXMODE [value]<cr>
Operation
Response: NEOXMODE [value]<CR>
Read/Write
Parameters
[value] Selection
0
Cinema
1
Music
2
Game
13. Generate Subwoofer with Neo:X
Generate a subwoofer (LFE) channel when using Neo:X with a 2-channel input source.
Command: @NEOXLFE [value]<cr>
Operation
Response: NEOXLFE [value]<CR>
Read/Write
Parameters
[value] Selection
0
Disable
1
Enable
To Next Page
Loading...
