Datasat RS20i - 18. Height Gain for Pro Logic IIz; 19. Auro-3 D Strength; 20. Auro-3 D Preset; 21. Auro-3 D Listening Mode

RS20i Installation and Operating Guide Page E-13
Appendix E. Remote Command API Document #: 9301H52900 Ver. 1.02
18. Height Gain for Pro Logic IIz
This command sets or reads the height gain selection used with Pro Logic IIz.
Command: @DPL2HEGAIN [value]<cr>
Response: DPL2HEGAIN value<CR>
Read/Write
Parameters:
[value] Selection
0
Low
1
Mid
2
High
19. Auro-3D Strength
This command sets upmixing strength for Auro-3D
Parameters:
[value] Selection
1-16
16 is the highest strength level
20. Auro-3D Preset
This command sets or reads the Auro-3D Preset. Selections are Small, Medium, Large,
or Speech
Parameters:
[value] Selection
0
Small
1
Medium
2
Large
3
Speech
21. Auro-3D Listening Mode
This command sets or reads the Auro-3D Listening Mode. Selections are Stereo,
Surround, and Auro-3D
Command: @AUROSTRENGTH [value]<cr>
Response: AUROSTRENGTH value<CR> Read/Write
Command: @AUROPRESET [value]<cr>
Response: AUROPRESET value<CR> Read/Write
Command: @AUROLM [value]<cr>
Response: AUROLM value<CR> Read/Write