Deif PPM 300 - Brightness; About Brightness Menu; View or Configure Brightness Level Setting

10.4 Brightness
10.4.1 About brightness menu
The brightness menu allows you to do the following:
View or configure the Brightness level setting.
View or configure the Brightness time setting.
10.4.2 View or configure brightness level setting
View or configure the Brightness level setting under Tools > Advanced > Brightness > Brightness level.
Figure 10.2 Example brightness level screen
Changing brightness level setting
To change the brightness level setting, perform the following steps:
1. Select Tools, from the Home menu.
2. Select Advanced, from the Tools menu.
3. Select Brightness, from the Advanced menu.
4. Select Brightness level, from the Brightness menu.
• The currently configured brightness level is shown with a solid box.
5. Highlight the required brightness level by pressing Up
or Down .
PPM 300 Operator's manual 4189340910 UK
www.deif.com
Page 132 of 157