By changing the display language, all of the menus, options, and help become translated automatically.
INFO
The master language is always available to select, but it cannot be modified.
Figure 6.3 Example of language change
You can then operate the display in your desired language.
Changed the display language
To change the displayed language, perform the following steps:
1. Select Log on, from the Home menu.
2. Select Language
.
• A blue pop is displayed:
•
3. Select either:
• Press OK to change the displayed language.
◦ The display unit now restarts in the new language.
• Press Back to cancel the change and return to the previous screen.
6.5 Reset
6.5.1 Reset display unit
If you unplug the Ethernet connection and move it to another controller, you need to reset the display unit.
PPM 300 Operator's manual 4189340910 UK
www.deif.com Page 61 of 157
To Next Page
Loading...
