6. Log on
6.1 Permissions
6.1.1 About permissions
The controller is protected by group and user permissions, which allow access to the functionality of the controller. To access
the controller you must log on by using a user and password. The user has associated permissions to the controller and
software.
INFO
Group and user permissions can only be created and configured by using PICUS.
The display unit can be used without the need to log on a user profile, however this only provides limited access or features.
See PICUS, Permissions and passwords in the Designer's handbook for more information regarding groups
and users.
6.2 Log on
6.2.1 Log on to controller
Log on to the display under Log on.
INFO
You do not need to log on to the controller to view the Live data information or access Alarms.
PPM 300 Operator's manual 4189340910 UK
To Next Page
Loading...
