1. Introduction
1.1 About the Operator's manual
1.1.1 Intended users of the Operator's manual
This is the operator's manual for DEIF's Protection and Power Management controller, PPM 300. The manual is for the
operator who uses the controller display unit. The manual includes an introduction to the display unit (LEDs, push-buttons
and screen), basic operator tasks, alarms, logs, more advanced operator tasks, and trouble shooting. The information in this
manual is simplified and general.
See the Designer's handbook for more detailed information and descriptions..
DANGER!
Read this manual before you operate the system. Failure to do this could result in personal injury and
damage to the equipment.
1.1.2 Software versions
The information in this document corresponds to the following software versions.
Table 1.1
Software versions
Software Details Version
PCM APPL Controller application 1.0.4.x
DU APPL Display unit application 1.0.4.x
PICUS PC software 1.0.1.x
1.1.3
Technical support
You can read about service and support options on the DEIF website, www.deif.com. You can also find contact details on the
DEIF website.
You have the following options if you need technical support:
• Help: The display unit includes context-sensitive help.
• Technical documentation: Download all the product technical documentation from the DEIF website:
www.deif.com/documentation
• Training: DEIF regularly offers training courses at the DEIF offices worldwide.
• Support: DEIF offers 24-hour support. See
www.deif.com for contact details. There may be a DEIF subsidiary located near
you. You can also e-mail support@deif.com.
• Service: DEIF engineers can help with design, commissioning, operating and optimisation.
PPM 300 Operator's manual 4189340910 UK
www.deif.com Page 7 of 157
To Next Page
Loading...
