6. Select the brightness level by pressing OK .
• The selected brightness level is shown with a solid box.
7. To confirm the change, select Next
.
• The setting becomes saved to the display unit.
• After the brightness time setting expires, due to inactivity with the display unit, the display becomes the brightness level.
10.4.3
View or configure the brightness time setting
View or configure the Brightness time setting under Tools > Advanced > Brightness > Brightness time.
Figure 10.3 Example brightness time screen
Changing brightness time setting
To change the brightness time setting, perform the following steps:
1. Select Tools, from the Home menu.
2. Select Advanced, from the Tools menu.
3. Select Brightness, from the Advanced menu.
4. Select Brightness time, from the Brightness menu.
• The currently configured brightness time is shown with a solid box.
5. Highlight the required brightness time by pressing Up
or Down .
6. Select the brightness time by pressing OK .
• The selected brightness time is shown with a solid box.
7. To confirm the change, select Next
.
• The setting becomes saved to the display unit.
• After the brightness time setting expires, due to inactivity with the display unit, the display becomes the brightness level.
PPM 300 Operator's manual 4189340910 UK
www.deif.com Page 133 of 157
To Next Page
Loading...
