Desoutter CVI3 Vision User Manual

6159930310_07_01/2016 - 19 -
5 - TOOL
Path: Main menu / Conguration / Tool
This part shows the conguration of each connected tool. It
may be different according to the tool model.
5.1 - Tool 1
Tool 1 is the name of the tool with cable connection.
• Select how to manage the triggers.
Start with push
start
• Press the tool against the screw to
start the tightening operation.
Safety-start:
handle + front
This mode means that the operator has
to press two triggers at the same time
to perform the tightening operation.
The purpose is to ensure that the
operator has both hands on the tool
before triggering.
Safety-start:
handle + front +
timer
This mode forces the operator to press
the 1st trigger and then the 2nd trigger
in a dened time.
• Enter the max. time in ms. When
this time is reached and the second
trigger is not pressed, the tool will not
start.
All triggers
disabled
• Tick this mode to disable all triggers.
The only possibility to start the tool is
to use the external input event (Start/
stop tightening) and in that case,
the tool trigger must be pressed and
locked.
• Use the Desoutter «Trigger
locker» part no. 6153978420
to have the tool trigger
pressed continuously.
5.2 - Tool 51
Tool 51 is the name of the wireless battery tool.
When the tool is connected to the controller, the tool model is
displayed.

Desoutter CVI3 Vision Specifications

General

Brand	Desoutter
Model	CVI3 Vision
Category	Controller
Language	English