6159930310_07_01/2016 - 49 -
11.2 - Tool
11.2.1 - Tool identication / characteristics
Path: Main menu / Maintenance / Tool
• Use the left, right or down arrow keys:
- to navigate from one screen to another
- to change the tool
11.2.2 - Tool identication
• Enter a comment (100 characters).
11.2.3 - Tool characteristics (read-only)
The characteristics of the tools are:
- Tool family
- Motor type
- Tool type
- Gear ratio
11.2.4 - Tool conguration (read-only)
Path: Main menu / Maintenance / Tool
This screen shows the tool conguration (triggers, xed
accessories, etc...).
Available for Desoutter technicians only.
It is mandatory to calibrate the tools after they
have been modied.
• Refer to the CVIMONITOR user manual at http://
resource-center.desouttertools.com.