Develop ineo 4020 - Page 182

User's Guide
- 182 -
Use
To
Output Lighting
Off
Dim
Bright
Set the lighting for the standard output bin.
Off: The lighting turns off when paper remains in the standard
bin.
Dim: The lighting turns on with a dim light when paper remains
in the standard bin.
Bright: The lighting turns on with a bright light when paper
remains in the standard bin.
Notes:
• This menu item appears only when lighting is installed in
the standard output bin.
• When Eco-Mode is set to Off or Plain Paper, Bright is the
default setting. When Eco-Mode is set to Energy or
Energy/Paper, Dim is the default setting.
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Specify whether icons and buttons have audio feedback.
Notes:
• On is the factory default setting for Button Feedback.
• 5 is the factory default setting for Volume.
Show Bookmarks
Yes
No
Specify whether bookmarks are displayed from the Held Jobs
area.
Note: Yes is the factory default setting. When Yes is selected,
bookmarks appear in the Held Jobs area.
Allow Background Removal
On
Off
Specify whether image background removal is allowed in copy,
fax, e-mail, FTP, or scan-to-flash-drive jobs.
Note: On is the factory default setting. The background of the
image will be removed.
Allow Custom Job Scans
On
Off
Scan multiple jobs to one file.
Note: On is the factory default setting. If On is selected, then
Allow Custom Job Scans can be enabled for specific jobs.
Scanner Jam recovery
Job Level
page Level
Specify how a scan job should be reloaded if a paper jam
occurs in the ADF.
Note: Job Level is the factory default setting.