Develop ineo 4020 - Page 198

User's Guide
- 198 -
Use
To
Contrast
0–5
Best for content
Specify the contrast in the scanned image.
Note: “Best for content” is the factory default setting.
Mirror Image
Off
On
Create a mirror image of the original document.
Note: Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note: Off is the factory default setting.
Shadow Detail
-4 to 4
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Adjust ADF Skew
Auto
Off
On
Correct the slight skew in the scanned image.
Notes:
• Off is the factory default setting.
• This menu item is supported only in select printer models.
Scan edge to edge
Off
On
Specify if the original document is scanned edge-to-edge prior to faxing.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Temperature
-4 to 4
Specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the
default while “warm” values generate a redder output than the default.
Note: 0 is the factory default setting.
Auto Convert Color Faxes to
Mono Faxes
On
Off
Convert all outgoing faxes to black and white.
Note: On is the factory default setting.