Develop ineo 4020 - Page 199

User's Guide
- 199 -
Fax Receive Settings menu items and their descriptions
Use
To
Enable Fax Receive
On
Off
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Fax Job Waiting
None
Toner
Toner and Supplies
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Rings to Answer
1–25
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Auto Reduction
On
Off
Scale an incoming fax job so that it fits the size of the paper loaded in the
designated fax source.
Note: On is the factory default setting.
Paper Source
Auto
Tray [x]
Multi-Purpose Feeder
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Sides (Duplex)
Off
On
Enable two-sided (duplex) printing for incoming fax jobs.
Notes:
• Off is the factory default setting.
• This menu item appears only when a print duplexer is installed.
Separator Sheets
Off
Before Job
After Job
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Specify where the printer will pick the separator sheet.
Note: Tray 1 is the factory default setting.