Develop ineo 4020 - Page 200

User's Guide
- 200 -
Use
To
Fax Footer
On
Off
Print the transmission information at the bottom of each page from a received
fax.
Note: Off is the factory default setting.
Max Speed
2400
4800
9600
14400
33600
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Fax Forwarding
Print
Print and Forward
Forward
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
Forward to
Fax
E-mail
FTP
LDSS
eSF
Specify the type of recipient to which faxes will be forwarded.
Notes:
• Fax is the factory default setting.
• This menu item is available only from the Embedded Web Server.
Forward to Shortcut
Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP,
LDSS, or eSF).
Note: You can enter up to 16 characters.
Block No Name Fax
Off
On
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Banned Fax List
Enable the list of blocked fax numbers stored in the printer.
Note: You can enter up to 512 characters.