Dodge Intrepid - Page 568

(32) Remove low/reverse reaction plate snap ring
(Fig. 47).
(33) Remove low/reverse clutch pack (Fig. 48).
(34) Remove chain cover (Fig. 49).
(35) Stand trans upright on bellhousing.
(36) Remove chain oiler (Fig. 50).
CAUTION: Be sure to reinstall the chain snubber
and chain oiler when reassembling.
Fig. 47 Remove Low/Reverse Reaction Plate Snap
Ring
1 - SCREWDRIVER
2 - LOW/REVERSE REACTION PLATE FLAT SNAP RING
3 - DO NOT SCRATCH CLUTCH PLATE
Fig. 48 Remove Low/Reverse Clutch Pack
1 - CLUTCH PLATES (5)
2 - CLUTCH DISCS (5)
Fig. 49 Remove Chain Cover
1 - TRANSAXLE CASE
2 - CHAIN COVER
Fig. 50 Remove Chain Oiler
1 - CHAIN SNUBBER
2 - CHAIN OILER
LH TRANSAXLE 21 - 21
42LE AUTOMATIC TRANSAXLE (Continued)