Dodge Intrepid - Page 656

(7) Remove OD/Reverse pressure plate (Fig. 266).
(8) Remove OD/Reverse reaction plate wave snap
ring (Fig. 267).
(9) Remove OD shaft/hub and OD clutch pack (Fig.
268) (Fig. 269).
NOTE: Tag overdrive clutch pack for reassembly
identification.
Fig. 266 OD/Reverse Reaction Plate
1 - OD/REVERSE PRESSURE PLATE (STEP SIDE DOWN)
2 - (STEP SIDE DOWN)
Fig. 267 Waved Snap Ring
1 - OVERDRIVE SHAFT ASSEMBLY
2 - OD/REVERSE CLUTCH WAVED SNAP RING
3 - SCREWDRIVER
Fig. 268 Remove OD Clutch Pack
1 - OVERDRIVE SHAFT ASSEMBLY AND OD CLUTCH PACK
2 - #3 THRUST PLATE
3 - #3 THRUST WASHER
4 - UNDERDRIVE SHAFT ASSEMBLY
Fig. 269 Overdrive Clutch Pack
1 - OVERDRIVE CLUTCH PLATE
2 - OVERDRIVE SHAFT ASSEMBLY
3 - OVERDRIVE CLUTCH DISC
LH TRANSAXLE 21 - 109
INPUT CLUTCH ASSEMBLY (Continued)